RAID
-
Hardware RAID5 & RAID6
-
Supports RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, and NRAID
-
RAID Migration
-
Configurable stripe size and write policy per logical drive
-
Multiple Global, Dedicated, & Enclosure-specific hot-spares
-
Intelligent Drive Handling:
-
In degraded mode: skips irreparable blocks to continue rebuild
-
In normal operation: data-block verification and repair
Host Interface
-
Mini SAS SFF-8088
-
4 PHY ports per Mini SAS connector
-
Concurrent I/O commands
-
Tagged command queuing up to 1024
-
Max. command queue up to 1024
Drive Interface
-
Sixteen (16) hot-swappable drive trays
-
Accommodates 1-inch pitch, 3.5-inch SATA-II (3Gbps) disk drives
-
S.M.A.R.T. and NCQ support
-
Automatic bad-sector reassignment
-
Dedicated bandwidth to each connected drive
-
Drive buffer on/off switch
System Components
-
Heavy duty 3U enclosure
-
Single RAID and I/O management controller module
-
Fault-tolerant modules interfaced through a common backplane
-
One (1) 256MB DDR DIMM module (default, supports up to 1GB in size)
-
Redundant, hot-swappable 530W power supply units
-
Redundant, dual-speed cooling modules
-
Hot-swappable drive trays with anti-tamper locks
-
Two (2) forearm handles
-
Li-Ion battery backup unit (BBU), life expectancy and charge level aware
Management
-
COM1 serial port for local access to firmware-embedded utility
-
COM2 for UPS serial connection
-
GUI, Telnet, and SSH system monitoring via Ethernet
-
Java-based SANWatch software
-
Firmware-embedded manager via RS-232C (audio jack) that is platform independent
-
Widest range of event notification methods including Email, LAN broadcast, fax, SNMP traps, SMS, and MSN
-
LCD keypad panel to all configuration options
-
Event log in reserved space
-
Variable logical drive options per DIMM size
-
Module status LED indicators:
-
Two (2) per drive tray
-
Seven (7) per controller module
-
One (1) per power supply unit
-
One (1) per BBU module
-
Two (2) per cooling module
-
Presence detect & thermal sensors via I²C bus
|
Input |
100VAC at 9A 8A, 240VAC at 4.5A with PFC (auto-switching) |
|
47 to 63Hz |
|
Output |
Maximum output: 460 Watts |
|
+12.0V |
24A max. |
|
+ 5.0V |
36A max. |
|
+ 3.3V |
32A max. |
Cooling Module
Redundant dual-thermal-fan cooling modules
|
Maximum air flow: |
90 CFM (high speed); 70.7 CFM (low speed) |
Environmental Specifications
|
Operating temperature: |
5° to 40°C (35°C if battery is applied) |
|
Non-operating temperature: |
- 40° to 60°C |
|
Relative humidity: |
5 to 95%, non-condensing |
|
Operating altitude: |
Operating: 0 to 10,000 ft |
Dimensions:
-
Chassis without handles: 445(W) x 130(H) x 488.2(D) mm
-
Chassis with handles: 482.6(W) x 131(H) x 504.3(D) mm
-
Package: 567(W) x 423(H) x 772(D) mm
System weight
-
Net weight: 28.5kg (62.7 pounds)
-
Gross weight: 30.5kg (67.1 pounds)
ES A16S-G2130
Datasheet
